Description

Industrial-TX beacon:

  • Designed for outdoor and industrial applications
  • TX-only beacon – can transmit ultrasonic, but can’t receive it
  • Very solid compound-sealed IP67 level protection
  • Special IP67-protected 25-kHz transducers
  • External antenna with SMA connector for extended radio range
  • Currently, supports license-free 915MHz ISM band (US) and license-free SRD band 868MHz (EU). Future 433MHz HW variants may come in some months, but no firm schedule yet. You can place orders for 433MHz. When sufficient amount is collected, we will produce the 433MHz version as well
  • Two IP67 external connectors:
    1. Power:
      • +12V power supply (works from +6V to +15V)
      • Reset pin (different from early batch Industrial-TX and Industrial-RX – check with us, if you bought in Sep.2019 or earlier)
      • DFU pin (different from early batch Industrial-TX and Industrial-RX – check with us, if you bought in Sep.2019 or earlier)
      • GND
    2. Interfaces:
      • RS485
      • UART 3.3V
      • USB (TX+RX)
      • GND
  • Corresponding IP67 connectors (male part) included
  • No battery inside by default – external power bank or external power supply (+12V). Optional variant with internal battery is available on request
  • Extended working temperature range: -40C…+50C (provided by design)
  • Embedded reset switch and DFU switch – magnetic control
  • Can work with Industrial-RX beacon and Mini-RX beacon and Beacon HW v4.9 with 25kHz ultrasonic sensors and Super-Beacon. In all cases, the radio bands must match
  • Ultrasonic range – up to 30m
  • Radio range to modem – up to a few hundred meters in open space with full-size antennas
  • Optional external IP67 converter ~110/220V to +12V

Produced on request. Lead time – 3-5 days.

Description

Industrial-TX beacon:

  • Designed for outdoor and industrial applications
  • TX-only beacon – can transmit ultrasonic, but can’t receive it
  • Very solid compound-sealed IP67 level protection
  • Special IP67-protected 25-kHz transducers
  • External antenna with SMA connector for extended radio range
  • Currently, supports license-free 915MHz ISM band (US) and license-free SRD band 868MHz (EU). Future 433MHz HW variants may come in some months, but no firm schedule yet. You can place orders for 433MHz. When sufficient amount is collected, we will produce the 433MHz version as well
  • Two IP67 external connectors:
    1. Power:
      • +12V power supply (works from +6V to +15V)
      • Reset pin (different from early batch Industrial-TX and Industrial-RX – check with us, if you bought in Sep.2019 or earlier)
      • DFU pin (different from early batch Industrial-TX and Industrial-RX – check with us, if you bought in Sep.2019 or earlier)
      • GND
    2. Interfaces:
      • RS485
      • UART 3.3V
      • USB (TX+RX)
      • GND
  • Corresponding IP67 connectors (male part) included
  • No battery inside by default – external power bank or external power supply (+12V). Optional variant with internal battery is available on request
  • Extended working temperature range: -40C…+50C (provided by design)
  • Embedded reset switch and DFU switch – magnetic control
  • Can work with Industrial-RX beacon and Mini-RX beacon and Beacon HW v4.9 with 25kHz ultrasonic sensors and Super-Beacon. In all cases, the radio bands must match
  • Ultrasonic range – up to 30m
  • Radio range to modem – up to a few hundred meters in open space with full-size antennas
  • Optional external IP67 converter ~110/220V to +12V

Produced on request. Lead time – 3-5 days.

Additional information

Frequency

915/868MHz (US/EU)

Questions and Answers


Salvatore Mennella
4 months 29 days ago

Is it possible to recognize two or more mobile transmitter beacons inside the same network of receiver beacons?. Thank you. Salvatore

admin
4 months 28 days ago

Sure! We support up to 250 beacons in both IA and NIA

Maciek
3 months 30 days ago

Do you produce Beacon Industrial-TX with IMU?
I’d appreciate your answering.

admin
3 months 30 days ago

All Industrial beacons are with IMU. Moreover, soon we will discontinue other types of non-IMU beacons, such as, for example, Beacon HW v4.9 without IMU

Maciek
3 months 30 days ago

Thank you very much!