MM_HELP_0002: Georeferecing
– assigning geographic coordinates for the Marvelmind
map
You can specify your geographic
location by setting georeferencing in modem settings
as shown on screenshot below.
Geolocation of point X=0, Y=0 is specified.
Note that the Y
axis should direct to the true North for correct coordinates conversion.
Rotate the map or submap
to achieve this direction (see section 11.11 of the operating manual for more
details) :
https://marvelmind.com/pics/
After georeferencing the system will report correct
latitude and longitude of the mobile beacon via NMEA0183 or U-blox protocol (select the protocol in the ‘Interfaces’
section of settings).