Help with communication between a Beacon and an Arduino

Frequent questions asked online, offline, in forums are answered here
Post Reply
smoker77
Posts: 327
Joined: Sat Feb 06, 2016 4:03 pm

Re: Help with communication between a Beacon and an Arduino

Post by smoker77 »

Hello,

Mobile beacon sends data according to section 2.3.1 of the protocol:
https://marvelmind.com/pics/marvelmind_ ... rfaces.pdf

For your example it should be sequence of binary bytes like this:
0xff 0x4a 0x01 0x02 0x0c 0x06 0x00 0x03 0x16 0xff 0x20 0x00 0x00 0x00 0x00 0x00 0x00 <CRC1> <CRC2>
0xff 0x4a 0x01 0x02 0x0c 0x06 0x01 0x03 0x3a 0xff 0x5B 0x00 0x00 0x00 0x00 0x00 0x00 <CRC1> <CRC2>
0xff 0x4a 0x01 0x02 0x0c 0x06 0x02 0x03 0x20 0x00 0xf4 0xff 0x00 0x00 0x00 0x00 0x00 <CRC1> <CRC2>

User avatar
admin
Site Admin
Posts: 305
Joined: Tue Jan 26, 2016 7:06 pm
Contact:

Re: Help with communication between a Beacon and an Arduino

Post by admin »

Gabriel wrote:Do you know if there is premade program to see the path without LCD?
You don't need LCD. Simply, our Arduino was with LCD. But it is very irrelevant

Post Reply