In a space of about 8x8m empty and 6m high, four TX super-beacon were installed at 2.1m points at each corner, and the modem was installed in the center of the left end.
However, when the Hedgehog (RX Super-beacon) was turned on, there were so many jumps that accurate measurements could not be made, and the color of the Hedgehog Beacon was marked in a color other than normal blue, and the location information of the beacon was not confirmed on the Dashboard.
Which part should I check again in this case?
Leave the video link below together.
https://drive.google.com/file/d/10Eniti ... sp=sharing
I wonder what caused the 'jump' phenomenon of Hedgehog beacons.
Re: I wonder what caused the 'jump' phenomenon of Hedgehog beacons.
Passes the parameter value of the Hegdehog used. The detailed parameters below have not been changed and are all default values.
https://drive.google.com/file/d/19cr3rL ... sp=sharing
https://drive.google.com/file/d/19cr3rL ... sp=sharing
Last edited by yunsik on Thu Jun 22, 2023 3:59 am, edited 1 time in total.
Re: I wonder what caused the 'jump' phenomenon of Hedgehog beacons.
Line of sight is the most important notion of understanding in indoor positioning systems:
- https://marvelmind.com/line_of_sight/
- https://www.youtube.com/watch?v=zg3oW_U_jdY&t=1608s
Most likely, you have jumps because of non-line of sight.
Line of sight may not be as obvious as you may think:
- https://youtu.be/FW7fdm6az-4
Other typical mistakes and how to avoid them:
- https://youtu.be/JmVjpypEc04
- https://marvelmind.com/line_of_sight/
- https://www.youtube.com/watch?v=zg3oW_U_jdY&t=1608s
Most likely, you have jumps because of non-line of sight.
Line of sight may not be as obvious as you may think:
- https://youtu.be/FW7fdm6az-4
Other typical mistakes and how to avoid them:
- https://youtu.be/JmVjpypEc04