Sending your own data using Marvelmind Beacons and Modem

Frequent questions asked online, offline, in forums are answered here
Post Reply
EKislitskaya
Posts: 1
Joined: Wed Mar 02, 2022 3:39 pm

Sending your own data using Marvelmind Beacons and Modem

Post by EKislitskaya »

Hello! I am using Marvelmind super beacons and 5.1 modem. I need to send my own data from Arduino/ESP32/android serial port to PC by using marvelmind radio channel. Does the protocol of reading/writing data from/to user device from paragraph 3.2 of this manual: https://marvelmind.com/old/downloads/ma ... _14_v3.pdf implements this feature?
There was such question 5 years ago, the answer was to use robot control commands, but it doesn't suit my project. I hope that something have changed since 2017.
Thanks for help beforehand!

User avatar
admin
Site Admin
Posts: 376
Joined: Tue Jan 26, 2016 7:06 pm
Contact:

Re: Sending your own data using Marvelmind Beacons and Modem

Post by admin »

Hello,

Yes, supported.

Please, always use the latest Protocol Description document only: https://marvelmind.com/download/ => https://marvelmind.com/pics/marvelmind_interfaces.pdf.

From the robot:
- Any data to the modem to the Dashboard to the log can be sent. Described in the document above

To the robot:
- Use the same protocol as the path sending any data, but instead of the path - your data. Also described in the "Hardware interfaces and protocols of
data exchange with Marvelmind devices" document

BR,
Maxim

Post Reply