Setup Movement Path Closes Instantly

Frequent questions asked online, offline, in forums are answered here
Post Reply
ArthurGoins
Posts: 1
Joined: Thu Feb 25, 2021 9:26 pm

Setup Movement Path Closes Instantly

Post by ArthurGoins »

In dashboard version V6.24a, in both Windows and Linux, when I right-click on the Hedge beacon and click Setup movement path, the setup window will open then immediately close itself. All beacons and modem are on the correct version, and are all shown as connected in the dashboard. Everything else works, I am able to see the hedge position changing correctly if I move the beacon, but I just can't use the movement path feature.

sinacena
Posts: 1
Joined: Wed Mar 31, 2021 11:43 pm

Re: Setup Movement Path Closes Instantly

Post by sinacena »

I have this problem too

Alex10183
Posts: 1
Joined: Thu Apr 08, 2021 2:15 pm

Re: Setup Movement Path Closes Instantly

Post by Alex10183 »

I also have this issue, did you manage to solve it?

smoker77
Posts: 367
Joined: Sat Feb 06, 2016 4:03 pm

Re: Setup Movement Path Closes Instantly

Post by smoker77 »

Hello,

This is known issue, we will fix it in next software update.
Current workaround is to manually enable robot control setting for the mobile beacon as shown in the attached screenshot.
Attachments
set_robot_control.png
set_robot_control.png (8.22 KiB) Viewed 1175 times

Post Reply