HedgeHog not detected in IA

Frequent questions asked online, offline, in forums are answered here
Post Reply
chandana
Posts: 1
Joined: Thu Feb 18, 2021 12:08 pm

HedgeHog not detected in IA

Post by chandana »

Hi,
I have Marvelmind Beacon Super-MP-3D hardware. I have implemented the NIA using Super-MP-3D beacons. It worked fine. I tried to implement IA using the same hardware and updating the firmware of IA but I am facing an issue. Mobile beacon is not detected in the dashboard. I tried changing the update rate but found no results. RSSI of Mobile beacon is within the range. May i know if there is any software upgrade to be done.

smoker77
Posts: 366
Joined: Sat Feb 06, 2016 4:03 pm

Re: HedgeHog not detected in IA

Post by smoker77 »

Hello,

The difference between IA and NIA is that you need to freeze both submap and map when the submap is ready.
And the mobile beacon should be already woken when you freeze the map, because map settings are uploaded to the mobile beacon at the moment of freezeng the map.
Also, after uploading IA firmware after NIA, we recommend to press 'default' button in dashboard for all beacons and modem to make sure all settings are switched to default state. Also press 'erase map' for modem to make sure the NIA map is cleared.

Post Reply