Collect x-y data from NIA starter set

Frequent questions asked online, offline, in forums are answered here
Post Reply
sumedhvaidya5
Posts: 1
Joined: Mon Mar 09, 2020 2:10 am

Collect x-y data from NIA starter set

Post by sumedhvaidya5 »

I am using the nia starter set for a project and want to send current x and y position data to Arduino. There are no data pins on the hedge and I couldn't find any info on how to collect this data from the modem. Can someone help me with this. Thank you!

smoker77
Posts: 322
Joined: Sat Feb 06, 2016 4:03 pm

Re: Collect x-y data from NIA starter set

Post by smoker77 »

Hello,
You can find pinout of modem in operating manual, section 8.3:
https://marvelmind.com/pics/marvelmind_ ... manual.pdf
See USART2_RX and USART2_TX UART pins.
Pinouts of different types of beacons are also placed in sections 8.x
Examples of connection to Arduino are here (updated examples will come soon):
https://marvelmind.com/wp-content/uploa ... _03_07.pdf
Exampe of Arduino code for receiving location data is here:
https://marvelmind.com/pics/hedgehog_sa ... rt_v4a.zip

Post Reply