Static Beacons positions

Frequent questions asked online, offline, in forums are answered here
Post Reply
atul0532
Posts: 1
Joined: Wed Sep 18, 2019 7:37 pm

Static Beacons positions

Post by atul0532 »

I have 5 static Beacons which are being detected by the dashboard but there position is showing 0,0.
Even though I have placed as per the documentations and are more than 5m apart from eachother.
I have updated all the beacons and dashboard. All works at same frequency then also this problem persists.

User avatar
admin
Site Admin
Posts: 305
Joined: Tue Jan 26, 2016 7:06 pm
Contact:

Re: Static Beacons positions

Post by admin »

atul0532 wrote:I have 5 static Beacons which are being detected by the dashboard but there position is showing 0,0.
Even though I have placed as per the documentations and are more than 5m apart from eachother.
I have updated all the beacons and dashboard. All works at same frequency then also this problem persists.
1) Which types of beacons do you have?
2) Are you trying to build IA or NIA?
3) Which SW have you uploaded to the beacons and modem and does it correspond to the architecture you try to build (IA vs. NIA)?

Post Reply