Page 1 of 1

Re: Help with communication between a Beacon and an Arduino

Posted: Tue Jul 09, 2019 5:37 pm
by smoker77
Hello,

Mobile beacon sends data according to section 2.3.1 of the protocol:
https://marvelmind.com/pics/marvelmind_ ... rfaces.pdf

For your example it should be sequence of binary bytes like this:
0xff 0x4a 0x01 0x02 0x0c 0x06 0x00 0x03 0x16 0xff 0x20 0x00 0x00 0x00 0x00 0x00 0x00 <CRC1> <CRC2>
0xff 0x4a 0x01 0x02 0x0c 0x06 0x01 0x03 0x3a 0xff 0x5B 0x00 0x00 0x00 0x00 0x00 0x00 <CRC1> <CRC2>
0xff 0x4a 0x01 0x02 0x0c 0x06 0x02 0x03 0x20 0x00 0xf4 0xff 0x00 0x00 0x00 0x00 0x00 <CRC1> <CRC2>

Re: Help with communication between a Beacon and an Arduino

Posted: Thu Jul 11, 2019 8:12 pm
by admin
Gabriel wrote:Do you know if there is premade program to see the path without LCD?


You don't need LCD. Simply, our Arduino was with LCD. But it is very irrelevant