ROS raw distance data

Frequent questions asked online, offline, in forums are answered here
rossj13
Posts: 4
Joined: Thu Jan 17, 2019 12:25 am

ROS raw distance data

Postby rossj13 » Thu Jan 17, 2019 12:26 am

I am trying to get the raw distance data to each beacon through the ROS package. I have set "raw distance data" to enable under the hedges interface drop down menu however I am still only getting hedge positions and stationary positions. AM I missing something?

smoker77
Posts: 205
Joined: Sat Feb 06, 2016 4:03 pm

Re: ROS raw distance data

Postby smoker77 » Thu Jan 17, 2019 4:36 pm

Hello,
Do you trying to get raw distances data via modem or via hedge?
In current version only hedge outputs these data.

rossj13
Posts: 4
Joined: Thu Jan 17, 2019 12:25 am

Re: ROS raw distance data

Postby rossj13 » Thu Jan 17, 2019 6:09 pm

modem. That explains it. Thanks

rossj13
Posts: 4
Joined: Thu Jan 17, 2019 12:25 am

Re: ROS raw distance data

Postby rossj13 » Thu Jan 17, 2019 6:12 pm

any chance that gets added to available modem outputs in a future firmware/software release?

smoker77
Posts: 205
Joined: Sat Feb 06, 2016 4:03 pm

Re: ROS raw distance data

Postby smoker77 » Thu Jan 31, 2019 5:03 pm

Yes, we will add this feature in next software release which will come in a week or so.


Return to “FAQ”

Who is online

Users browsing this forum: GordonHap, Karolinaml and 3 guests