Page 1 of 1

Bridge Inspection Geotagging Images

Posted: Wed Dec 19, 2018 3:28 pm
by desmosedici
Hi All,

We are a professional UAV/Drone company in The Netherlands.

We have a very interesting project where we need specific hardware for.
We own a Phase One 100 Megapixel camera where we have to photograph the underside of a bridge.

As you guys know there is low to no GPS signal under the bridge to Geotag the taken images.
Therefore we were looking at an indoor GPS system which could be used to inspect the bridge.
I came across your solution and I was wondering if you could provide some advice if this would be the proper solution and if so, what components would we need?

We will use the Phase One camera with a Hot Shoe and we would like to register an co├Ârdinate every time the camera is triggered. Afterwards we can process the imagery to form a point cloud.

I'm looking forward to hear your opinions!

Thanks in advance!

Kind regards,

Remco

Re: Bridge Inspection Geotagging Images

Posted: Sat Mar 28, 2020 4:10 pm
by patricmacdroff
This is really very good that you can inspect a bridge with One 100 Megapixel camera where you have to photograph the underside of a bridge.