Search found 5 matches

by Npod
Wed Feb 17, 2021 7:10 am
Forum: FAQ
Topic: Inverse Architecture finds no beacons
Replies: 6
Views: 2786

Re: Inverse Architecture finds no beacons

Also, here's my oscilloscope output of signals received by the hedgehog from the various beacons. I'm not sure what to do with this information.
by Npod
Wed Feb 17, 2021 5:13 am
Forum: FAQ
Topic: Inverse Architecture finds no beacons
Replies: 6
Views: 2786

Re: Inverse Architecture finds no beacons

Attached is a picture of the setup. Beacons are circled in red.
by Npod
Wed Feb 17, 2021 5:01 am
Forum: FAQ
Topic: Inverse Architecture finds no beacons
Replies: 6
Views: 2786

Re: Inverse Architecture finds no beacons

I've attached a picture of the setup. There are 4 beacons in a 4.6m x 6.6m rectangle 1.5m off the ground, with hedgehog 10 in the middle, arranged as shown: 43 46 10 84 47 I manually entered the x,y coordinates of the beacons in meters, with 84 being at 0,0. The beacons are mounted with their antenn...
by Npod
Fri Feb 12, 2021 5:46 am
Forum: FAQ
Topic: Inverse Architecture finds no beacons
Replies: 6
Views: 2786

Re: Inverse Architecture finds no beacons

The problem was with the modem. Although it was connected to the PC and displayed the correct firmware, it didn't work. Replacing the modem with a different one with the same firmware corrected the problem. It can find the beacons and hedgehog now. Replacing the modem only leads to the next problem....
by Npod
Thu Feb 11, 2021 1:55 am
Forum: FAQ
Topic: Inverse Architecture finds no beacons
Replies: 6
Views: 2786

Inverse Architecture finds no beacons

I'm trying to set up my inverse architecture starter kit with no luck so far. All the firmware is up to date and IA (V6.240i), and the beacons are straight out of the IA starter kit (4 standard beacons on different frequencies and a mini-rx). All beacons are fully charged. When I connect the modem i...