Search found 32 matches

by Alexander_Marvelmind
Tue Dec 15, 2020 5:42 pm
Forum: FAQ
Topic: Lost tracking data near one beacon
Replies: 2
Views: 1801

Re: Lost tracking data near one beacon

Well, thanks for detailed post. 1) As I can see, your beacons placed on walls, but on videos mobile beacon goes out of bounds. Is it really possible? If not, then there is some distances mistake (between stationary beacons), try to check that distances and enter it manually. 2) Not really clear why ...
by Alexander_Marvelmind
Tue Dec 15, 2020 5:25 pm
Forum: FAQ
Topic: Industrial NIA setup
Replies: 1
Views: 1431

Re: Industrial NIA setup

Hello, Yes, it's the same SW as for Industrial Super-Beacon. Board is the same in your case (you have pre-installed Super-Beacon SW and can be sure that Super-Beacon SW is suitable for your beacons) You are right to be very careful with it, some users may have Industrial Beacons with previous HW ins...
by Alexander_Marvelmind
Tue Dec 15, 2020 3:24 pm
Forum: FAQ
Topic: Stationary Beacons "linked" together and moving around
Replies: 1
Views: 262

Re: Stationary Beacons "linked" together and moving around

Hello, General recommendation for map building - Wake up beacons for SM1 - build SM1 - freeze it, lock it (green square near to "freeze submap" button). Create SM2 - Wake up beacons for SM2 - build SM2 - freeze it, lock it. And etc.. Otherwise, it can jump somewhere, or new beacons can try to ruin p...
by Alexander_Marvelmind
Tue Dec 15, 2020 12:05 pm
Forum: FAQ
Topic: Error durint modem firmware upgrade
Replies: 3
Views: 422

Re: Error durint modem firmware upgrade

Hello,
Please do the DFU programming for the first time you use Modem HW v5.1.
DFU programming process described in details in the Operating Manual - https://marvelmind.com/pics/marvelmind_ ... manual.pdf - SW update chapter.
by Alexander_Marvelmind
Wed Dec 09, 2020 4:35 pm
Forum: FAQ
Topic: Hedgehog bad positioning
Replies: 1
Views: 346

Re: Hedgehog bad positioning

Hello, did you press default for every device after SW update?

Also it is good to check if distances are correct. Please check it, and if it is wrong - use manual distances input
by Alexander_Marvelmind
Wed Dec 09, 2020 3:20 pm
Forum: FAQ
Topic: Error durint modem firmware upgrade
Replies: 3
Views: 422

Re: Error durint modem firmware upgrade

Hello, please use DFU SW update for the first time you upgrade the Modem HW v5.1 But, please, make sure you have exactly HW v5.1 version, and not HW v4.9 Otherwise, wrong SW may kill the device in the worst case scenario. After that update, you can use regular hex update (via Dashboard) for future u...
by Alexander_Marvelmind
Thu Aug 13, 2020 11:59 am
Forum: FAQ
Topic: What is the correct axis of mobile beacon?
Replies: 3
Views: 2115

Re: What is the correct axis of mobile beacon?

Hello,

We will check it and give a reply soon.
Maybe, it's just a mistake in the Operating Manual.

Thank you for your feedback.
by Alexander_Marvelmind
Tue Aug 11, 2020 5:59 pm
Forum: FAQ
Topic: NO connection of beacons
Replies: 3
Views: 2037

Re: NO connection of beacons

I suppose the problem was solved in the online chat
by Alexander_Marvelmind
Mon Aug 10, 2020 3:22 pm
Forum: FAQ
Topic: NO connection of beacons
Replies: 3
Views: 2037

Re: NO connection of beacons

Hello, Please describe the way you updated the SW. Step by step. File names, What instructions did you use? I suppose there is something basic. Usually, if SW update went wrong for some some reason - try DFU Programming. But be very careful - DFU Programming has no control what .dfu file you upload....
by Alexander_Marvelmind
Fri Jul 31, 2020 11:40 am
Forum: FAQ
Topic: About the submap
Replies: 9
Views: 8653

Re: About the submap

Sure you can :) - Just make sure that your robot won't drive away, and will provide proper radio coverage to all you beacons. - Also be careful with radio overload - do not place modem and beacon closer than 1.5m. (If closer, you can try to reduce overload screwing off the antenna on the beacon whic...